Staan opname

Gebruikersavatar
Nordferkel
Berichten: 60
Lid geworden op: 26 jun 2012, 20:11

Staan opname

Ongelezen bericht door Nordferkel » 02 dec 2018, 22:29

Hi!

Someone cut the holder of the stand at my AV56. So I need this part from the frame to mount an new one. The part under the yellow line is missed. Can someone help me?

Thanks!

Afbeelding

Afbeelding

Gebruikersavatar
Nordferkel
Berichten: 60
Lid geworden op: 26 jun 2012, 20:11

Re: Staan opname

Ongelezen bericht door Nordferkel » 03 dec 2018, 00:36

Sorry, that part is missed:

Afbeelding

Gebruikersavatar
PantinNL
Berichten: 1210
Lid geworden op: 07 sep 2017, 14:47
Woonplaats: Helmond

Re: Staan opname

Ongelezen bericht door PantinNL » 03 dec 2018, 00:48

The best solution is to make the missing plate by yourself.
You only need a steel plate or profile and weld it together.
Henk

Gebruikersavatar
Franky
Berichten: 4590
Lid geworden op: 02 jan 2011, 14:24
Locatie: Wageningen, Gelderland, Nederland

Re: Staan opname

Ongelezen bericht door Franky » 03 dec 2018, 18:05

I don't think it is separate part. You will have to make it your self or cut it out of another frame.
Perhaps a home made side stand could be an interesting alternative. Some people think a side stand looks better anyway.

Gebruikersavatar
Nordferkel
Berichten: 60
Lid geworden op: 26 jun 2012, 20:11

Re: Staan opname

Ongelezen bericht door Nordferkel » 03 dec 2018, 22:11

Perhaps someone has a broken frame. A side stand is nice. But not helpful while starting the engine :D

Gebruikersavatar
Franky
Berichten: 4590
Lid geworden op: 02 jan 2011, 14:24
Locatie: Wageningen, Gelderland, Nederland

Re: Staan opname

Ongelezen bericht door Franky » 03 dec 2018, 22:27

You do realise that the stand isn't capable of holding someone's weight while peddling to start the engine? It is not going to fail immediately if you try, but it is not designed for this purpose. It will eventually fail.
I think you just figured out why someone cut the stand off :lol:

Gebruikersavatar
Nordferkel
Berichten: 60
Lid geworden op: 26 jun 2012, 20:11

Re: Staan opname

Ongelezen bericht door Nordferkel » 03 dec 2018, 22:56

I always stand beside the Moby while starting! For sure! :D

But you are right. Could be a possible reason. And it will be much easier to mount a side stand.

loe
Berichten: 1226
Lid geworden op: 28 jun 2015, 19:52
Locatie: oude pekela

Re: Staan opname

Ongelezen bericht door loe » 03 dec 2018, 23:45

Not verry practical .starting on a side mount can be dangerous..if u give 2 much gas while starting.ur moby wil take off like a wild horse.

Gebruikersavatar
Nordferkel
Berichten: 60
Lid geworden op: 26 jun 2012, 20:11

Re: Staan opname

Ongelezen bericht door Nordferkel » 04 dec 2018, 00:21

It is just a short-time solution. Until I found this frame part or when my welder friend has time.

Plaats reactie